GMP, Audits & Batch Records: What They Prove

Manufacturing & QC: What GMP, Audits, and Batch Records Really Prove

Every factory has a certificate wall. Very few buyers ask for the paperwork that actually describes how a batch was made. Here is the buyer-side reading of GMP, audits and batch records — what each one proves, and the questions that separate a managed factory from a decorated one.

Independent advisor, paid by the buyer. I run my own biotech company but I am not a factory, and I don’t represent one. This guide is about documents you can ask for before you pay — not about certifying anyone.


01 GMP is a standard, not a promise

GMP stands for Good Manufacturing Practice: a system of procedures, controls and records intended to make each batch come out the same way. In the US it appears as cGMP under FDA 21 CFR Part 111, which sets expectations around specifications for identity, purity, strength and composition, process controls, and the records that must exist for each batch. Other markets have their own frameworks, and none of them are the same document.

Here is the distinction that saves buyers the most money. A certificate says a system was assessed. A batch record says what happened. They are different kinds of evidence, and only one of them is about your product.

There is a second distinction inside the word “certificate.” Some certificates are third-party management-system certificates — ISO and similar. These are issued by a certification body, they describe a quality-management system rather than a specific product or batch, and they expire. Others are government production permits, which authorise an entity to manufacture certain product forms at all. Confusing them is the same error described in Vet suppliers: smooth paper from the wrong category.

Short answer: GMP means a factory operates documented controls over how it makes things, not that any particular batch was made well. A GMP certificate tells you a system was assessed at some point by somebody; it does not describe your lot. The document that describes your lot is the batch production record, and only that one lets you trace a problem backwards.

In my experience, this is where experienced buyers and new buyers diverge most sharply. New buyers ask for certificates because they are easy to obtain and reassuring to look at. Experienced buyers ask for dated audit records and one completed batch record, because those two documents are hard to produce on demand and impossible to fake convincingly at speed.

Why it matters (impact): Certificates are cheap to supply and weak as evidence of your batch. Records are slow to supply and strong as evidence. Time your document requests accordingly — ask for what is hard to produce, not what is easy to hand over.

Short answer

GMP describes how a factory controls its process; it does not certify a batch, a shipment, or a result. Ask for three things together: who assessed the system and when, dated evidence it is still operating, and the batch record for the specific lot you are buying.

Certificate versus practice

What you hold What it actually proves What it does not prove
GMP / cGMP certificate A system was assessed by the issuing body, under its scope and dates That any given batch was made under those controls
ISO-style system certificate A documented management system existed at assessment That the system covers your product form, or still runs today
Government production permit The named entity may legally manufacture a product category Anything about quality, consistency, or audit history
Third-party audit report, dated An independent party examined operations at that time Anything about lots produced outside the audit window
Batch production record What was done to one lot, by whom, on which equipment Anything about other lots or future batches
Batch certificate of analysis Test results for one lot, by named methods Compliance with your market’s rules

The pattern across that table: the closer a document is to your lot, the stronger it is. I keep saying this to buyers because it reverses the usual priority order, and the usual order is expensive.


02 What a real audit looks at

An audit is not a tour. A tour shows you a clean corridor and a gowning room. An audit asks where the documents are, then follows them backwards from a finished lot to the raw material that went in.

Facility

Physical condition matters, but less than buyers assume, and mainly as a signal of attention. What I look at: segregation between raw and finished material, control of returned or rejected goods, pest control records, water system maintenance logs, calibration stickers on scales and instruments with dates that have not lapsed, and whether the line configuration matches the product being claimed. A tidy room with no documentation is a showroom.

Records

This is where the answer lives. Ask to pick one finished lot from the last few months and follow it. A coherent trail includes the raw material lots received, their release testing, the weighing record, the blending or granulation record, in-process checks with results written at the time, the deviation log for that lot, and the finished-product release decision signed by a named person.

Watch how quickly they can retrieve it, and whether the entries look written in sequence or filled in at once. In the field the tell is rarely dramatic: it is a trail that is too clean, dates that cluster, or a document set that exists beautifully for one lot and not for its neighbours.

Who audited

This question is asked least and explains most. There is a real difference between first-party self-assessment, second-party assessment commissioned by a customer, and third-party audit by an independent body. There is also a difference between a full-system audit and a short checklist visit. Ask who performed it, what standard it was against, what scope it covered, and whether findings were raised and closed. A facility with findings that were closed inside a documented corrective-action process often tells you more than a facility that reports nothing ever went wrong.

Worth reading twice: “We were audited” is not an answer. Follow it with: by whom, against what standard, what scope, when, and what findings were closed.


03 In-process QC you can ask about

Finished-product testing tells you about the end. In-process controls tell you whether the end was reached by a controlled route or by luck. Machines drift, blends separate, and errors made early are not reliably caught at the end of a run.

Checkpoints worth asking about

  • Raw material release. Incoming lots quarantined until testing is complete, then released. Ask what happens to material used before release.
  • Weighing and dispensing. Weighed by whom, checked by whom, recorded against which lot numbers. Double-checking of critical additions is standard practice.
  • Blend uniformity. Especially for low-dose actives, where poor blending produces uneven units that average out fine in a composite sample.
  • In-process checks during encapsulation or tableting. Weight variation, disintegration or hardness, appearance checks taken at intervals and recorded at the time.
  • Metal detection and sieving where applicable, with records rather than just equipment presence.
  • Line clearance between products. Essential where allergens or potent actives are involved, and routinely skipped under schedule pressure.
  • Deviation and corrective-action log. Every real factory has entries here. None at all is itself suspicious.

A buyer’s no-lab version

You cannot test your way to confidence without a laboratory, but you can ask questions whose answers are hard to fake:

  • Show me the record for the last lot that failed an in-process check, and what you did about it.
  • Which instruments were calibrated most recently, and can I see the dates?
  • If we disagree about a batch later, can you retrieve the retained sample and its storage conditions?
  • Who signs the release decision for finished goods, by name and role?
  • Were any batches produced for other customers on the same line this week?

Notice that none of those require laboratory access. All of them require the factory to actually run the system the certificate describes.


04 Batch records: the paper trail that protects you

If there is one document in this whole stage worth fighting for, it is the batch production record. It is also the one buyers most often forget to request, because it arrives after the sale rather than before it.

What it should contain

A usable record identifies the product and its batch number, links to every input lot used, records the quantities actually weighed rather than only the intended recipe, names the equipment and the operators, carries the in-process results with times, records any deviation and how it was handled, and ends with a release decision signed by an authorised person. Where cleaning occurred, there is a cleaning record. Where a rework happened, there is a rework record.

One lot, followed backwards Raw material input lots named Weighing actual, double-checked Process + IPC results at time Deviation log handled, closed Release decision named person signs If any link is missing, traceability stops there No input lot names → you cannot recall anything upstream. No in-process results written at the time → the checks were not really done. No retained sample → there is nothing left to re-test if the batch is disputed.
A batch record is a chain. Its value disappears at the first broken link.

Why it has to be batch-specific

A template is not a record. Suppliers sometimes offer a blank exemplar showing what their documentation looks like, which is genuinely useful for review but tells you nothing about what occurred. The version that protects you names your batch number and carries your lot’s actual figures.

This is exactly the same principle as the COA question in Raw materials & extracts: a document about the product type is not evidence about the item in your warehouse. And it is the practical mechanism behind the real-world case where one batch-specific COA was the only thing standing between a buyer and below-spec material — documented in that case file.

Ask for the record with the goods, not after an argument. Agree the document set at order stage, in writing, alongside the payment milestones described in Inspection, payment & logistics.


05 Third-party versus in-house testing

Both have a place, and the honest distinction is independence, not competence.

In-house laboratory testing is fast, cheap, and continuous. A factory with a real internal lab can check blends during a run and catch drift before it becomes a whole batch. Where an internal lab operates to a recognised competence standard such as ISO/IEC 17025, its results carry structural weight. Where it does not, the results are still operationally useful — just not independent.

Third-party testing brings independence: the party measuring is not the party selling. It costs more and takes longer. For release testing of finished goods and for dispute-triggering attributes, that independence is often worth buying, particularly for high-dose or high-liability products.

The arrangement I suggest buyers aim for is not either-or. Let in-house testing do process control where it belongs, and specify third-party testing for the attributes that matter most commercially — the named potency assay and the contaminant panels — with the choice of laboratory named by the buyer where possible. Which laboratory matters more than buyers realise: “third-party” chosen by the seller is a weaker instrument than “independent” chosen by you.

A refusal to allow independent testing on a material that carries real risk is not a pricing position. Read it as information about what the results would show.


06 Questions to settle before you commit

Run this before placing an order, and again before releasing a balance payment:

  • Who holds the production permit, and does it cover the product form I am buying?
  • Which body issued any certificate shown, what scope, and what expiry?
  • Is there a dated third-party audit within the recent past, and were findings raised and closed?
  • Can I follow one finished batch backwards to its named input lots, on request?
  • Are in-process checks recorded at the time, with operators’ names against the entries?
  • Is there a deviation log, and does it contain real entries rather than being empty?
  • Who signs batch release, by name and role?
  • Are retained samples kept, under stated conditions, for long enough to re-test later?
  • Which laboratory will test my lot, and may I name an independent one?
  • What document set ships with the goods, agreed in writing before production?

If a supplier can answer most of these promptly and can produce a real batch record without a struggle, you are usually dealing with a working system. If every answer is a certificate and none is a record, take note: a slow answer is often the answer itself.


07 Scope and boundaries (what this guide covers — and what it won’t sign off)

This guide covers the buyer-side framework for reading manufacturing quality: what GMP means and does not mean, what audits examine, which in-process controls to ask about, what a batch record must contain, and how to think about testing independence. It is the “why” and the “what to look for.”

It does not provide an audit checklist to execute on site, request scripts, or fill-in worksheets. Those live in the free China Sourcing Pitfall Guide, delivered by email.

And one hard line: I do not certify any factory as GMP-compliant. Whether an entity operates to a given standard is a conclusion for a qualified auditor and the regulator, not for an article and not for me at distance. My job is to help you ask questions whose answers are expensive to fake.


Found this useful?

Grab the free China Sourcing Pitfall Guide, the 9-step checklist I send buyers before every order, including the batch-record fields and manufacturing questions to agree in writing.

Get the free guide

About the author

Luo Gang has spent 20+ years inside China’s health and nutrition industry and 10+ years running his own biotech company (botanical extracts and dietary supplements, from raw material to finished product). He is a native Chinese speaker based in China, works on the buyer’s side of the table, and is not a factory and does not represent one. He is paid by buyers, not by any factory, with no commissions.

Sources checked

  • [A] FDA 21 CFR Part 111: Current Good Manufacturing Practice for dietary supplements; requires specifications for identity, purity, strength and composition, process controls, batch production records, and handling of deviations. fda.gov
  • [A] ISO/IEC 17025:2017: general requirements for the competence of testing and calibration laboratories; the international reference for laboratory accreditation under the ILAC framework. iso.org
  • [A] ISO 9001: a third-party certifiable quality-management-system standard, distinct from a government manufacturing permit or a product approval. iso.org
  • [C] A certificate issued by a third-party body evidences assessment of a system at a point in time; it is not a batch result, not a manufacturing licence, and not evidence about any particular lot.
  • [C] Testing independence matters more than testing venue: results from a laboratory chosen by the seller weigh differently from one named by the buyer.
  • [B] Certificate walls with no dated audit evidence, batch records reconstructed after the fact, empty deviation logs, and relabelled exemplars standing in for lot-specific records, as recurring patterns based on 20+ years of first-hand sourcing observation.
  • [D] No factory names, licence numbers, certificate numbers, auditor identities, exact limits, retention periods, or timeframes are stated here. Confirm every requirement against your target market’s current regulations and your own specification.

FAQ

Q: What does GMP actually mean for supplements? A: GMP means a factory runs documented controls over how it manufactures: specifications for identity, purity, strength and composition, written procedures, in-process checks, trained staff, and records for each batch. Under FDA 21 CFR Part 111 in the US, this includes batch production records and deviation handling. What GMP does not mean is that any specific batch was made well — evidence about your lot comes from that lot’s batch record and testing, not from the certificate.

Q: What should a batch record contain? A: A batch production record should name the product and batch number, every input lot used, the quantities actually weighed rather than only the intended recipe, the equipment and operators involved, in-process results recorded at the time, any deviation and how it was handled, and a release decision signed by an authorised person. Cleaning records and rework records belong alongside it. If the input lots are unnamed or the in-process results are missing, traceability stops there.

Q: Is third-party testing always better than the factory’s own lab? A: Not always better, but different. In-house testing is fast and continuous, which makes it right for process control during a run: it can catch drift before it becomes a whole batch. Third-party testing adds independence because the party measuring is not the party selling, which makes it worth specifying for commercially critical attributes such as the potency assay and contaminant panels. Aim to let in-house testing do the process work, specify independent testing for the attributes that carry the most risk, and name the laboratory yourself where you can.



Related: Telling a factory from a trader · Reading a supplement COA · Mapping certs to target markets · Case file: the standardized extract that wasn’t. Start with the free China Sourcing Pitfall Guide.

Independent advisor · On the buyer’s side.

Luo Gang

Independent China health-product sourcing advisor. Your “China eye” from spec to shipment.

© Luo Gang. All rights reserved. Independent advisor · On the buyer’s side.

Similar Posts